Santa Throne
0 (0 Likes / 0 Dislikes)
Greetings Kickstarters, Mr and Mrs Santa Clauses, and Christmas enthusiastics.
My name is Victor Schmith, and I am the wood wizard.
I'm here today to demonstrate the assembly and putting together of a Santa throne.
Proceed with us.
Take out the side piece, and lower back, and line those up.
Self supporting. Line those up. Lock it. Keeping those at 90 degrees.
And you tip the throne a little bit.
Put it on.
Don't forget your pins.
Pretty stable in design.
Find a flat floor.
Pretty strong.
Now we'll show you the reverseability of the other chair.
[birds chirping, boards clunking]
That gives your your reverseability, then you've got the mix and match.
Now we'll disassemble the other one.
One that's the finished version.
Comes apart a little easier than it goes together.
That, Santa, and Christmas enthusiastics, is the throne, put together and taken apart.
Working on the bag for transport, for those Santas on the run. The chair is in the bag.
Thank you for your time.
Proceed with us.
Take out the side piece, and lower back, and line those up.
Self supporting. Line those up. Lock it. Keeping those at 90 degrees.
And you tip the throne a little bit.
Put it on.
Don't forget your pins.
Pretty stable in design.
Find a flat floor.
Pretty strong.
Now we'll show you the reverseability of the other chair.
[birds chirping, boards clunking]
That gives your your reverseability, then you've got the mix and match.
Now we'll disassemble the other one.
One that's the finished version.
Comes apart a little easier than it goes together.
That, Santa, and Christmas enthusiastics, is the throne, put together and taken apart.
Working on the bag for transport, for those Santas on the run. The chair is in the bag.
Thank you for your time.