Watch videos with subtitles in your language, upload your videos, create your own subtitles! Click here to learn more on "how to Dotsub"

video subtitulado

0 (0 Likes / 0 Dislikes)
There are many kinds of video beam and requires it to be handled properly. Must adjust and calibrate the optical, lenses, zoom and RGB plate, because they'll loosening motion, vibration, shock, etc. When no video signal to the computer does not come Beam image, only a blue screen, you must verify that the projector is in computer mode, pressing the PC mode from the projector applications. Verify that the computer is set to an original resolution to agree with the projector. Establ├ęcelo between 60Hz to 75Hz maximum or minimum placement as shipped from factory When the text is blurry, verify that the computer is set to an original resolution to agree with the projector. Establ├ęcelo between 60Hz to 75Hz maximum or minimum as shipped from factory to place or leave the hardware in touch with Windows NT If the computer is a laptop off the screen. If the remote does not work as a mouse, make sure they have installed the correct cable to the computer projector. These cables vary depending on the projector and you can find in the projector manual to guide you and know what is right. Restart the system each time they apply the cables. The USB port only is supported by Windows 98, Windows 2000 or MAC. OS 8.5 and higher. Make sure that you have installed the correct mouse drivers. And Serial is, IEE, PS / 2, USB. A USB port to ensure that this port is enabled, some laptops and desktops come standard with this port disabled Should contact them if you want to enable the port. Using the projector with remote control mouse does not require a special driver The unit uses standard drivers in different types of either mouse (USB, Serial, IEEE, PS / 2) When the projector does not light, do not turn on fans, lights and indicators should be removed from the projector lamp. Replace it with another, this is necessary because the projector can not make a good connection with the lamp. If the projector is not connected the lamp is not going to turn, this is done to provide security when the projector is switched on. replace it with another, this is necessary because the projector can not make a good connection with the lamp If the projector is not connected the lamp is not going to turn, this is done to provide security when the projector is switched on. Verify that the projector is in video mode when you're doing a PowerPoint presentation with MPG / AVI video and all I get is a black dialog box in my video, It is because the problem stems from their laptops, they use the laptops tend to absorb up to 80% of the strength of the signal generated by the video card.

Video Details

Duration: 1 minute
Country: Colombia
Language: Spanish (Spain)
Genre: None
Views: 87
Posted by: rodolfobecerra100 on Oct 2, 2010

Este video es una descripcion acerca del uso adecuado dl video beam

Caption and Translate

    Sign In/Register for Dotsub to translate this video.